1 Choose the correct blades
Check the length of the left and right blades and the connection type according to the model and year of the vehicle. The two front blades are often not the same length.
2 Put the wipers in the service position
Turn off the vehicle and, if the wipers hide under the hood, activate the service position according to the vehicle manual. Place a folded towel on the windshield.
3 Remove the old blade
Lift only one wiper arm, turn the blade, and press the tab or open the adapter clip. Pull out the blade without bending the metal arm.
⚠ Warning: Do not leave a raised bare metal arm unsupported. If the spring pulls the arm onto the glass, it can crack it.
4 Secure the new blade
Insert the appropriate adapter and push the blade until it clearly clicks. Gently pull it to verify it is locked, then carefully lower the arm onto the glass.
5 Test the wash and wipe
Repeat the process on the other side, remove the towel, and start the windshield washer. The blades should sweep smoothly, without skipping or touching the frame.
? Tip: If the new blade leaves streaks, clean the windshield and the rubber edge thoroughly first; grease and wax often cause smudging.